The Influence of Vocational Theory Competency Test Results on Vocational Practice Competency Test Results

Authors

  • Robyn Koloway SMK Negeri 2 Manado, Regional Education Services, North Sulawesi Provincial Government
  • Wendhel Ronga State University of Manado
  • Herry Sumual Department of Vocational Technology Education, Faculty of Engineering, State University of Manado
  • Djami Olii Department of Vocational Technology Education, Faculty of Engineering, State University of Manado
  • Agustinus Takaredase Department of Vocational Technology Education, Faculty of Engineering, State University of Manado

DOI:

https://doi.org/10.53682/edunitro.v4i1.8090

Keywords:

theoretical competency test results, practical competency test results, electric motor installation, vocational

Abstract

This study aims to determine how much the results of the theory of vocational competency tests are related to the results of the vocational practice competency tests of TITL students at SMK Negeri 2 Manado. In addition, this study also analyzed how relevant the vocational theory competency test material was to the vocational practice competency test material. The method used in this study is a quantitative method with 56 students as research subjects. In practice, the researchers found that some students already understood electric motors, and some did not understand when the researchers gave practice; as a result, these students did not understand when the researcher or teacher was giving theory to them. When researchers teach theory and practice, they often provide post-tests or questions for students to work on to see whether they comprehend correctly. The results showed a positive and significant effect on the results of the vocational theory competency test and the results of the vocational practice competency test. In addition, the results of the analysis of the relevance of the material in the theory of vocational competency tests to the results of the vocational practice competency tests were 70% in the relevant category.

References

Anwar, C. (2015). Learning Value at Senior High School Al-Kautsar Lampung for the Formation of Character. Journal of Education and Practice, 6(9), 40–45. www.iiste.org

Bird, A., & Osland, J. S. (2017). Global Competencies: An Introduction. In The Blackwell Handbook of Global Management (pp. 55–80). https://doi.org/https://doi.org/10.1002/9781405166355.ch3

Chrisbiyanto, Y., Wibowo, D., & Foat, A. (2022). The Effect Of Competence On The Performance Of Middle And High School Teachers At Cita Hati Schools In Surabaya. Journal Didaskalia, 5(2). https://doi.org/10.33856/didaskalia.v5i2.257

Fosnot, C. T., & Perry, R. S. (2005). Constructivism: A Psychological Theory of Learning. Constructivism: Theory, Perspectives, and Practice, 2(1), 8–33.

GLASS, G. V. (1978). STANDARDS AND CRITERIA. Journal of Educational Measurement, 15(4), 237–261. https://doi.org/https://doi.org/10.1111/j.1745-3984.1978.tb00072.x

Henri, M., Johnson, M. D., & Nepal, B. (2017). A Review of Competency-Based Learning: Tools, Assessments, and Recommendations. Journal of Engineering Education, 106(4), 607–638. https://doi.org/https://doi.org/10.1002/jee.20180

Hoffmann, T. (1999). The meanings of competency. Journal of European Industrial Training, 23(6), 275–286. https://doi.org/10.1108/03090599910284650

Hrynchak, P., & Batty, H. (2012). The educational theory basis of team-based learning. Medical Teacher, 34(10), 796–801. https://doi.org/10.3109/0142159X.2012.687120

Jackson, J., Dukerich, L., & Hestenes, D. (2008). Modeling Instruction: An Effective Model for Science Education. Science Educator, 17(1), 10–17. http://modeling.asu.edu.

Johnson, C. E. (1978). Identifying and Verifying Generic Teacher Competencies.

Kaligis, G., & Dakhi, A. (2023). The Influence of Work Attitudes on Student Achievement at SMK Negeri 1 Tomohon. JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro, 3(1), 31–38. https://doi.org/10.53682/edunitro.v3i1.5570

Kuijpers, J. M., Houtveen, A. A. M., & Wubbels, Th. (2010). An integrated professional development model for effective teaching. Teaching and Teacher Education, 26(8), 1687–1694. https://doi.org/https://doi.org/10.1016/j.tate.2010.06.021

Le Deist, F. D., & Winterton, J. (2005). What Is Competence? Human Resource Development International, 8(1), 27–46. https://doi.org/10.1080/1367886042000338227

Mamahit, C., Angmalisang, H., Sangi, N., & Marani, P. R. (2023). Practice Intensity Influences Successful Learning Outcomes: Study at Vocational High School in Serui, Papua, Indonesia. INTERNATIONAL JOURNAL OF RESEARCH AND INNOVATION IN SOCIAL SCIENCE (IJRISS), VII(12), 938–947. https://doi.org/https://dx.doi.org/10.47772/IJRISS.2023.7012072

Mamahit, C. E. J. (2019). ANALISIS PENGARUH MANAJEMEN WAKTU DAN MOTIVASI MENGAJAR TERHADAP KINERJA DOSEN. Manajerial, 18(1), 1–12. https://doi.org/https://doi.org/10.17509/manajerial.v18i1.11002

Martens, B. K., & Witt, J. C. (2004). Competence, persistence, and success: The positive psychology of behavioral skill instruction. Psychology in the Schools, 41(1), 19–30. https://doi.org/https://doi.org/10.1002/pits.10135

Mezirow, J. (1997). Transformative learning: Theory to practice. New Directions for Adult and Continuing Education, 74, 5–12.

Mohammad Saleh, A., Mandagi, G., & Kaligis, G. (2023). The Effect of Workshop Facilities on Practice Learning Outcomes of Students of SMKN 1 Tomohon. JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro, 3(1), 63–70. https://doi.org/10.53682/edunitro.v3i1.5779

Mustaro, P. N., & Silveira, I. F. (2006). Learning Objects: Adaptive Retrieval through Learning Styles. Interdisciplinary Journal of Knowledge and Learning Objects Learning Objects, 2(1), 35–46. https://www.learntechlib.org/p/44812/

Nurasniar, W. A. (2021). Employee Performance Improvement Through Competence and Organizational Culture with Work Motivation as A Mediation Variable. APTISI Transactions on Management (ATM), 6(2), 121–131. https://doi.org/10.33050/atm.v6i2.1743

Purnawirawan, O., Made Sudana, I., & Harlanu, M. (2019). Journal of Vocational Career Education Assessment of 4C Softskills Characteristics in Learning Productive Graphic Design Subject for Vocational School. JVCE, 4(1), 53–60. https://doi.org/https://doi.org/10.15294/jvce.v4i1.21867

Rombot, T., Mamahit, C., Ticoh, J., & Tuegeh, M. (2022). Hubungan Fasilitas dengan Prestasi Belajar Mata Kuliah Bidang Studi Semester 1 Pendidikan Teknik Elektro. JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro, 2(2), 115–122. https://doi.org/10.53682/edunitro.v2i2.4417

Setiyawami, Sugiyo, Sugiyono, & Rahardjo, T. J. (2020). The Role of Vocational Education on the Advancement of Human Development in Indonesia. Proceedings of the International Conference on Science and Education and Technology (ISET 2019), 406–410. https://doi.org/10.2991/assehr.k.200620.079

Sudjana, N. (2010). Penilaian hasil proses belajar mengajar. In Remaja Rosdakarya. PT. Remaja Rosda Karya.

Sugiyono. (2014). Metode Penelitian Pendidikan pendekatan Kuantitatif, Kualitatif dan R&D. In METODE PENELITIAN ILMIAH.

Sugiyono. (2015). Statistik untuk Penelitian. Alfabeta.

Sumiarsi, N., & Pendidikantarakan, D. (2015). Analisis Kompetensi Pedagogik dan Pengembangan Pembelajaran Guru SD Negeri 041 Tarakan. Jurnal Kebijakan Dan Pengembangan Pendidikan, 3(1), 99–104.

Voorhees, A. B. (2001). Creating and Implementing Competency-Based Learning Models. New Directions for Institutional Research, 2001(110), 83–95. https://doi.org/https://doi.org/10.1002/ir.13

Zhu, C., Wang, D., Cai, Y., & Engels, N. (2013). What core competencies are related to teachers’ innovative teaching? Asia-Pacific Journal of Teacher Education, 41(1), 9–27. https://doi.org/10.1080/1359866X.2012.753984

Downloads

Published

2024-04-20

How to Cite

Koloway, R., Ronga, W., Sumual, H., Olii, D., & Takaredase, A. (2024). The Influence of Vocational Theory Competency Test Results on Vocational Practice Competency Test Results. JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro, 4(1), 1-8. https://doi.org/10.53682/edunitro.v4i1.8090

Issue

Section

Articles