Design of Automatic Lighting Installation Props Using Photocell and Motion Sensors
DOI:
https://doi.org/10.53682/edunitro.v4i1.8580Keywords:
props, lighting installations, photocell sensors, motion sensorsAbstract
This teaching aid design approach is based on compiling learning materials that are fully necessary to achieve the desired understanding and skills. In the lighting installation subject, vocational electrical power installation techniques at SMK Negeri 2 Sinabang, there needs to be more demonstration media, which causes problems for students who find it very difficult to understand lighting installations and put them together. With this teaching aid medium, it is hoped that it can help students' understanding of installing lighting installations and improve student learning outcomes so that learning objectives are achieved. This teaching aid is designed to be a learning medium as a teacher's aids in teaching material on automatic lighting installations using photocell sensors and motion sensors in electrical power installation subjects. To determine the suitability of the props, a research instrument was made in the form of a media validation sheet, material validation, and questionnaire validation. The learning outcomes of students are known by providing several pre-test and post-test questions so that they can be used as a reference for how successful or appropriate the teaching aids are to be applied to students and lighting installation subjects. Based on the percentage results obtained from media expert validation, namely 89%, and material expert validation, namely 100% from the validator assessment, learning outcomes through the pre-test were 28% and the post-test 83%. The results obtained were based on validation showed "Very Feasible."
References
Abast, K., Kilis, B., Angmalisang, H., Rapar, J., & Sangi, N. (2023). Analisis dan Perancangan Instalasi Penerangan Gedung Perpustakaan Universitas Negeri Manado. JURNAL EDUNITRO, 3(2), 127–134.
Adu, S. S. (2022). Penerapan model think, pair, and share berbasis alat peraga untuk meningkatkan kemampuan berpikir kritis siswa [Bachelor Thesis]. Universitas Pelita Harapan.
Aprilia, R. D., Harijanto, A., & Subiki, S. (2022). Rancang Bangun Alat Peraga Fisika Efek Doppler Menggunakan Modul Sensor Suara dan Arduino. Jurnal Fisika Unand, 11(2), 139–145. https://doi.org/10.25077/jfu.11.2.139-145.2022
Barrow, R. (2015). Giving Teaching Back to Teachers A Critical Introduction to Curriculum Theory. Routledge.
Efendi, R. (2020). RANCANG BANGUN ALAT PERAGA ENERGI TEBARUKAN BERBASIS ENERGI SURYA [Bachelor Thesis]. Nusa Putra University.
Gervais, J. (2016). The operational definition of competency-based education. The Journal of Competency-Based Education, 1(2), 98–106. https://doi.org/https://doi.org/10.1002/cbe2.1011
Gustiani, S., & Sriwjaya, P. N. (2019). RESEARCH AND DEVELOPMENT (R&D) METHOD AS A MODEL DESIGN IN EDUCATIONAL RESEARCH AND ITS ALTERNATIVES. HOLISTICS JOURNAL, 11(2).
Haleem, A., Javaid, M., Qadri, M. A., & Suman, R. (2022). Understanding the role of digital technologies in education: A review. Sustainable Operations and Computers, 3, 275–285. https://doi.org/https://doi.org/10.1016/j.susoc.2022.05.004
Imamah, N., & Sagara Andika, D. (2021). PERANCANGAN SISTEM MONITORING DAN PENGENDALIAN LAMPU MENGGUNAKAN SENSOR GERAK DAN SENSOR CAHAYA DILENGKAPI INTERNET OF THINGS (IOT) (Studi Kasus Fakultas Teknologi Informasi Universitas Bale Bandung). Jurnal Informatika-COMPUTING, 8(2).
Juhler, M. V. (2016). The Use of Lesson Study Combined with Content Representation in the Planning of Physics Lessons During Field Practice to Develop Pedagogical Content Knowledge. Journal of Science Teacher Education, 27(5), 533–553. https://doi.org/10.1007/s10972-016-9473-4
Karo-Karo S, I. R., & Rohani. (2018). MANFAAT MEDIA DALAM PEMBELAJARAN. AXIOM, 7(1). https://doi.org/http://dx.doi.org/10.30821/axiom.v7i1.1778
Kause, M. C. (2019). Rancang Bangun Alat Peraga Fisika Berbasis Arduino (Studi Kasus Gerak Jatuh Bebas). CYCLOTRON, 2(1). https://doi.org/10.30651/cl.v2i1.2511
Kurniawan, K., & Setyo Budi, A. (2024). RANCANG BANGUN ALAT PERAGA KATUP TESLA PADA MATERI FLUIDA. Prosiding Seminar Nasional Fisika (E-Journal), 12. https://doi.org/10.21009/03.1201.PF20
Kwangmuang, P., Jarutkamolpong, S., Sangboonraung, W., & Daungtod, S. (2021). The development of learning innovation to enhance higher order thinking skills for students in Thailand junior high schools. Heliyon, 7(6). https://doi.org/10.1016/j.heliyon.2021.e07309
Malado, J., & Habibu, C. O. (2023). Pengembangan Modul Praktikum Instalasi Penerangan Listrik di SMK Negeri 1 Talaud. JURNAL EDUNITRO, 3(2), 115–126. https://doi.org/https://doi.org/10.53682/edunitro.v3i2.6389
Masterman, L. (2018). A Rationale for Media Education. In Media Literacy Around the World. Routledge.
Miranda, J., Navarrete, C., Noguez, J., Molina-Espinosa, J.-M., Ramírez-Montoya, M.-S., Navarro-Tuch, S. A., Bustamante-Bello, M.-R., Rosas-Fernández, J.-B., & Molina, A. (2021). The core components of education 4.0 in higher education: Three case studies in engineering education. Computers & Electrical Engineering, 93, 107278. https://doi.org/https://doi.org/10.1016/j.compeleceng.2021.107278
Morrison, G. R., Ross, S. J., Morrison, J. R., & Kalman, H. K. (2019). Designing Effective Instruction. John Wiley & Sons.
Nur Fajri, I. (2020). PEMANFAATAN ALIRAN SUNGAI UNTUK PLTA MINI SEBAGAI ALAT PERAGA BELAJAR SISWA SAAT PENDEMI COVID-19 DI DUKUH SENTONO. SEMINAR HASIL PENGABDIAN MASYARAKAT.
Plass, J. L., & Kaplan, U. (2016). Chapter 7 - Emotional Design in Digital Media for Learning. In S. Y. Tettegah & M. Gartmeier (Eds.), Emotions, Technology, Design, and Learning (pp. 131–161). Academic Press. https://doi.org/https://doi.org/10.1016/B978-0-12-801856-9.00007-4
Putri Lukman, M., & Rieuwpassa, Y. F. Y. (2018). SISTEM LAMPU OTOMATIS DENGAN SENSOR GERAK, SENSOR SUHU DAN SENSOR SUARA BERBASIS MIKROKONTROLER. Jurnal RESISTOR, 1(2). https://doi.org/https://doi.org/10.31598/jurnalresistor.v1i2.305
Siahaan, F. E. (2018). PENGARUH MODEL PEMBELAJARAN INKUIRI DENGAN PENGGUNAAN ALAT PERAGA FISIKA TERHADAP HASIL BELAJAR SISWA KELAS X SEMESTER II SMA. BAHASTRA, 3(1). https://doi.org/https://doi.org/10.30743/bahastra.v3i1.2528
Sugiyono. (2021). Metode Penelitian kuantitatif, kualitatif dan R & D (Ke-3). Alfabeta.
Supardi, Leonard, Suhendri, H., & Rismurdiyati. (2015). Pengaruh Media Pembelajaran dan Minat Belajar Terhadap Hasil Belajar Fisika. FORMATIF, 2(1). https://doi.org/http://dx.doi.org/10.30998/formatif.v2i1.86
Susanto, P., & Kusumawati, W. I. (2023). EDUKASI MANFAAT SENSOR PHOTOCELL DI KAMPUNG TOGA. Proficio, 4(2). https://doi.org/https://doi.org/10.36728/jpf.v4i2.2616
Truong, H. M. (2016). Integrating learning styles and adaptive e-learning system: Current developments, problems and opportunities. Computers in Human Behavior, 55, 1185–1193. https://doi.org/https://doi.org/10.1016/j.chb.2015.02.014
Vogler, J. S., Thompson, P., Davis, D. W., Mayfield, B. E., Finley, P. M., & Yasseri, D. (2018). The hard work of soft skills: augmenting the project-based learning experience with interdisciplinary teamwork. Instructional Science, 46(3), 457–488. https://doi.org/10.1007/s11251-017-9438-9
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Syaputra Rahmat, Muhammad Islamida, Raihan Rizal Fachri
This work is licensed under a Creative Commons Attribution 4.0 International License.
.gif){kind=logo}
.png)
.gif)
.png)
.png)
.png){kind=logo}
.gif)
.png)
