Trainer Kit Module for DC Motor Speed Control  Using Voice Commands Based on Arduino

Muhammad Khalid; Fathiah Fathiah; Gufran Ibnu Yasa Gufran

doi:10.53682/edunitro.v4i2.8588

Authors

Muhammad Khalid Ar-Raniry State Islamic University, Banda Aceh
Fathiah Fathiah Ar-Raniry State Islamic University, Banda Aceh
Gufran Ibnu Yasa Gufran Ar-Raniry State Islamic University, Banda Aceh

DOI:

https://doi.org/10.53682/edunitro.v4i2.8588

Keywords:

Trainer kit module, dc motor speed control, voice commands, Arduino, microcontroller

Abstract

Based on the results of observations made by researchers through direct observation of lecturers in the field of electricity, Electrical Engineering Education Study Program, it was found that there is a need for additional trainers as learning media in the electrical machine control course. This study aims to find out how to design a trainer kit design module for DC motor speed control using voice commands by utilizing the Arduino microcontroller. We also learned the results of testing the design of a trainer kit design module for DC motor speed control using voice commands by utilizing the Arduino microcontroller. The research method researchers use is the Research and Development (R&D) method, which aims to develop new products or innovations that benefit. Based on the results of expert validation, it can be concluded that the Arduino Microcontroller-Based Trainer Kit Practical Module obtained a high percentage of media experts at 96%, material experts at 95.5%, and language experts at 80%. These results indicate that this module gets the "Very Eligible" category to be applied to the Electrical Machine Control course.

References

Adriani, D., Lubis, P. K. D., & Triono, M. A. A. (2020). Teaching Material Development of Educational Research Methodology with ADDIE Models. The 3rd International Conference Community Research and Service Engagements, IC2RSE 2019, 4th December 2019, North Sumatra, Indonesia. https://doi.org/http://dx.doi.org/10.4108/eai.4-12-2019.2293793

Anjarwati, S., Risdwiyanto, A., Deni, A., Hendrawan, L., Melati, Lusono, A., Flora, H. S., Christian, F., Lubis, D. S. W., & Iryanto, M. (2024). METODOLOGI PENELITIAN KUANTITATIF. CV Rey Media Grafika.

Anugrah, F., Yudha, K., Nugroho, W., & Wahyono, T. (2022). Rancang Bangun Trainer Otomasi PLC Outseal 16 I/O. Journal of Mechanical Engineering and Mechatronics, 7(1), 51–62. https://doi.org/http://dx.doi.org/10.33021/jmem.v7i1.3377

Beard, C., & Wilson, J. P. (2018). Experiential Learning: A Practical Guide for Training, Coaching and Education (4th ed.). Kogan Page Publishers.

Ceraolo, M., & Poli, D. (2014). Fundamentals of Electric Power Engineering: From Electromagnetics to Power Systems. John Wiley & Sons.

Cuevas, E., Zaldivar, D., Ayala, E., González, Ó., & Vega, F. (2025). Fundamentals of Electromagnetism. In E. Cuevas, D. Zaldivar, E. Ayala, Ó. González, & F. Vega (Eds.), DC Motors: Modeling, Designing and Building with 3D Printers (pp. 1–15). Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-64354-5_1

De Doncker, R. W., Pulle, D. W. J., & Veltman, A. (2020). Advanced Electrical Drives: Analysis, Modeling, Control. Springer Nature.

Dewi, C., Tri Putra Yanto, D., & Hastuti. (2020). THE DEVELOPMENT OF POWER ELECTRONICS TRAINING KITS FOR ELECTRICAL ENGINEERING STUDENTS: A VALIDITY TEST ANALYSIS. JURNAL PTK, 3(2). https://doi.org/https://doi.org/10.24036/jptk.v3i2.9423

Fischer, H. E., Boone, W. J., & Neumann, K. (2023). Quantitative Research Designs and Approaches. Routledge.

Hamdani, Y., & Yohandri. (2020). Preliminary analysis of physical module practicum modelling project based learning to improve scientific skills of high school students. Journal of Physics: Conference Series, 1481(1), 012074. https://doi.org/10.1088/1742-6596/1481/1/012074

Hughes, A., & Drury, B. (2019). Electric Motors and Drives: Fundamentals, Types and Applications (5th ed.). Newnes.

Kim, S.-H. (2017). Electric Motor Control: DC, AC, and BLDC Motors. Elsevier.

Koloway, J., & Kattie, C. (2023). The Use of Trainer Kits to Improve Learning Outcomes of Electrical Lighting Installation. JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro, 3(1), 19–30. https://doi.org/10.53682/edunitro.v3i1.5488

Kustandi, C., & Darmawan, D. (2020). Pengembangan Media Pembelajaran: Konsep & Aplikasi Pengembangan Media Pembelajaran bagi Pendidik di Sekolah dan Masyarakat. Prenada Media.

Nam, K. H. (2018). AC Motor Control and Electrical Vehicle Applications (2nd ed.). CRC Press. https://doi.org/https://doi.org/10.1201/9781315200149

Nugroho, B. S., Agnesty, S. Y., Hamid, F. A., Suyanto, Wiyanto, Taman, & Malik, A. (2022). MODUL PRAKTIKUM LABORATORIUM FIRE & SAFETY. Adab.

Oei, S., Manueke, G., Mangkey, L., & Mamahit, O. W. (2024). Pengembangan Aplikasi Ujian Daring Interaktif Berbasis Web di Universitas Nusantara Manado. JURNAL EDUNITRO, 4(1), 47–58. https://doi.org/https://doi.org/10.53682/edunitro.v4i1.9237

Pamenang, F. D. N., Harta, J., Listyarini, R. V, Wijayanti, L. W., Ratri, M. C., Hapsari, N. D., Asy’ari, M., & Lee, W. (2020). Developing chemical equilibrium practicum module based on guided inquiry to explore students’ abilities in designing experiments. Journal of Physics: Conference Series, 1470(1), 012097. https://doi.org/10.1088/1742-6596/1470/1/012097

Rakha Firdaus, M., Arif Berbudi, T., Nurrahma, S., Izzaulhaq, G., & Hudati, I. (2023). Identifikasi Sistem Motor DC dan Penerapan Kendali PID, LQR, dan Servo Tipe 1 Berbasis Arduino-MATLAB. Jurnal Listrik, Instrumentasi, Dan Elektronika Terapan, 4(1). https://doi.org/https://doi.org/10.22146/juliet.v4i1.81918

Said, M., & Asnawi, R. (2018). PENGEMBANGAN TRAINER KIT BERBASIS HUMAN VOICE CONTROL PADA MATA PELAJARAN KENDALI ELEKTRONIKA DAN PROGRAMMABLE LOGIC CONTROL DI SMK N 1 PARINGIN (TRAINER KIT DEVELOPMENT BASED ON HUMAN VOICE CONTROL FOR SUBJECT OF ELECTRONICS AND PROGRRAMMABLE LOGIC CONTROL IN SMK N 1 PARINGIN). Jurnal Pendidikan Teknik Mekatronika, 8(1), 73–84. http://journal.student.uny.ac.id/ojs

Sarpong, D., Boakye, D., Ofosu, G., & Botchie, D. (2023). The three pointers of research and development (R&D) for growth-boosting sustainable innovation system. Technovation, 122, 102581. https://doi.org/https://doi.org/10.1016/j.technovation.2022.102581

Schallock, B., Rybski, C., Jochem, R., & Kohl, H. (2018). Learning Factory for Industry 4.0 to provide future skills beyond technical training. Procedia Manufacturing, 23, 27–32. https://doi.org/https://doi.org/10.1016/j.promfg.2018.03.156

Tong, W. (2022). Mechanical Design and Manufacturing of Electric Motors (2nd ed.). CRC Press. https://doi.org/https://doi.org/10.1201/9781003097716

Yudha, H. M. (2020). Buku Ajar Penggunaan Motor Listrik. Pantera Publishing.

Yusdartono, H. M., Ezwarsyah, Asri, Apriyulida, F., & Pratama, A. (2023). Penggunaan Algoritma PID sebagai Pengontrol Motor Universal Satu Fasa. NEM.